Okay, before you start putting in electrical outlets its probably a good idea to map out some of your potential power usage.
The image below shows what was my anticipated amp usage for 6 ASIC miners ...
Don't believe me? Don't worry, neither did I so I verified my numbers.
I had those 6 miners running and I measured the wire leading to the subpanel in the garage. While in theory it could draw 59.32 amps of power it was drawing 55 amps at the exact moment this photo was taken.
FYI...that's a digital clamp meter and you can find many types on Amazon.
If you have no idea how to use one please do a little research before you go digging in your electrical panel. You need to put the clamp over a hot wire and that may require you to remove some of the safety covers from your panel. I do not recommend you do this if you're not knowledgeable about electrical panels.
I had those 6 miners running and I measured the wire leading to the subpanel in the garage. While in theory it could draw 59.32 amps of power it was drawing 55 amps at the exact moment this photo was taken.
FYI...that's a digital clamp meter and you can find many types on Amazon.
If you have no idea how to use one please do a little research before you go digging in your electrical panel. You need to put the clamp over a hot wire and that may require you to remove some of the safety covers from your panel. I do not recommend you do this if you're not knowledgeable about electrical panels.