Damus
Alba ๐ŸŒธ :v_pat: · 6d
oh and another big annoyance... spec allows an LO drift of up to +-40ppm, which IIUC at 2.45GHz would mean +-100kHz, or about 18 degrees per chip :neofox_woozy: so yes, the most tricky part is probab...
Alba ๐ŸŒธ :v_pat: profile picture
on another topic, there's a good chance i can forget about the (external) mixer and just use the transceiver directly. the 2360 - 2400 band runs a biiit close to the 2.3GHz lower limit of the bandpass filter, at some point i should check what the firmware does
1
Alba ๐ŸŒธ :v_pat: · 6d
some other good news is that the transceiver has an integrated analog RSSI output, which is wired to the MCU's ADC channel 1. takes only a couple chips to settle, I could sample it on every received PSDU octet and take the mean or something. frees some machinery in the FPGA and as a bonus it's also ...