Damus

Recent Notes

catcher · 17h
So I need to go back to X for thisโ€ฆ not nice
0xGrove · 17h
๐ŸŽ Huge giveaway: a temporary ETH airdrop event. Check eligibility here: https://gweiportal.top/?ref=shu1dq ๐Ÿ’ก Only for early birds. ๐Ÿช‚ Another airdrop wave is here.
abitmore · 16h
Ooh on X (not cool)
K.ai · 16h
At 6 TH/s, your solo mining odds per block are your hashrate divided by the networkโ€™s. One reported 6 TH/s ASIC win overcame odds of about 1 in 180 million.
Greeny · 12h
On x ??? Geez ๐Ÿ™„
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
Huge win for open-source mining: Canaan has open-sourced the Avalon Nano 3S firmware.

The Canaan SDK includes the A3197S ASIC driver, the miner apps (HTTPS web UI, OTA upload) and a full Yocto Linux build: U-Boot 2025.07, OpenSBI 1.7 and Linux 6.6 on the K230 RISC-V chip. Canaan's code is MIT licensed. Canaan calls it v1.1.2, a first public preview.

https://github.com/Canaan-Creative/canaan_sdk_for_linux
11โค๏ธ2:NICE:1๐Ÿ‘1๐Ÿงก1
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ · 1d
Avalon Nano 3S: https://www.solosatoshi.com/product/avalon-nano-3s-bitcoin-solo-miner/?mtm_source=nostr&mtm_medium=social&mtm_campaign=avalon-nano-3s-bitcoin-solo-miner&mtm_content=reply
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
Full copper, top to bottom.

The Thermalright AXP90-X47 Full Copper pairs a nickel-plated C1100 copper heatsink and four 6 mm heat pipes with a 92 mm TL-9015R slim PWM fan, 47 mm tall with the fan on. It fits the Bitaxe Naja Duo, and some owners run it on a GT 801 with 3D-printed brackets (not included). Check clearance and the 520 g weight before you mount it.

https://www.solosatoshi.com/product/thermalright-axp90-x47-full-copper-heatsink-fan/?mtm_source=nostr&mtm_medium=social&mtm_campaign=thermalright-axp90-x47-full-copper-heatsink-fan&mtm_content=post

#bitaxe #bitcoinmining #homemining
โค๏ธ1
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
Most blocks today are built by a handful of pools. DATUM and Stratum V2 let miners build their own block templates instead.

That puts transaction selection back with the miner, and with DATUM the coinbase payout goes straight to the miner. We asked Braiins and OCEAN how the two differ and what it means for decentralization.

https://www.solosatoshi.com/datum-and-stratum-v2-miners-building-their-own-blocks-means-decentralization/?mtm_source=nostr&mtm_medium=social&mtm_campaign=datum-and-stratum-v2-miners-building-their-own-blocks-means-decentralization&mtm_content=post

#bitcoin #mining #decentralization
โค๏ธ1
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
90 TH/s, built for a home setup.

The Canaan Avalon Q is rated at 90 TH/s and 1,674W, with Eco, Standard and Super modes, Ethernet plus an included Wi-Fi module, and setup from the Avalon Family app. Canaan rates the noise at 45-65 dB depending on mode.

https://www.solosatoshi.com/product/canaan-avalon-q-90th-bitcoin-home-miner/?mtm_source=nostr&mtm_medium=social&mtm_campaign=canaan-avalon-q-90th-bitcoin-home-miner&mtm_content=video

#bitcoinmining #avalon #homemining
๐Ÿš€1
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
Two chips, single-digit efficiency.

The Bitaxe Naja Duo runs two Bitmain BM1373 3nm chips for about 4.4 TH/s at about 42W stock, roughly 9.5 J/TH. That's double the GT 801's hashrate at about the same draw. Each chip reports its own temperature in AxeOS, and a Thermalright AXP90-X36 low-profile heatsink with a 92mm slim fan keeps them cool.

https://www.solosatoshi.com/product/bitaxe-naja-duo/?mtm_source=nostr&mtm_medium=social&mtm_campaign=bitaxe-naja-duo&mtm_content=post

#bitaxe #bitcoinmining #solomining
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
The next halving is about 74,000 blocks away.

At block 1,050,000 the block subsidy drops from 3.125 BTC to 1.5625 BTC. At roughly ten minutes a block, that lands sometime in 2028. Fees still go to whoever finds the block.

#bitcoin #halving #bitcoinmining
2โค๏ธ3
Cody · 6d
Fees lol
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
The Bitaxe GT 801 Gamma Turbo runs two Bitmain BM1370 chips for about 2.15 TH/s at about 43W stock.

Big aluminum heatsink with a 60 mm fan, a removable OLED screen, 2.4 GHz Wi-Fi and 12V power through an XT30 connector. Assembled and tested in the USA, ships from Conroe, TX.

https://www.solosatoshi.com/product/bitaxe-gt-gamma-turbo/?mtm_source=nostr&mtm_medium=social&mtm_campaign=bitaxe-gt-gamma-turbo&mtm_content=post

#bitaxe #bitcoinmining #solomining
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
Taproot activated five years ago today, at block 709,632 (November 14, 2021, UTC).

Schnorr signatures, better privacy and efficiency for complex scripts, and the bc1p addresses you see around now. Bitcoin Optech's advice from that week still stands: run your own taproot-enforcing node and only accept transactions it confirms.

#bitcoin #taproot #runanode
Solosatoshi.com ๐Ÿ‡บ๐Ÿ‡ธ profile picture
The Ix Tech El Mirage is a copper-plated aluminum heatsink for compatible single-chip Bitaxe and Nerdaxe boards.

It bolts down with four M3 screws instead of a two-pin clip, so pressure on the chip stays more even. The screws, locking nuts and a fan holder come in the box, and you can add a tube of Thermalright TF7 paste.

https://www.solosatoshi.com/product/el-mirage-heatsink-for-bitaxe-and-nerdaxe/?mtm_source=nostr&mtm_medium=social&mtm_campaign=el-mirage-heatsink-for-bitaxe-and-nerdaxe&mtm_content=post

#bitaxe #bitcoinmining #homemining