Damus

Recent Notes

Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
Two chips, single-digit efficiency.

The Bitaxe Naja Duo runs two Bitmain BM1373 3nm chips for about 4.4 TH/s at about 42W stock, roughly 9.5 J/TH. That's double the GT 801's hashrate at about the same draw. Each chip reports its own temperature in AxeOS, and a Thermalright AXP90-X36 low-profile heatsink with a 92mm slim fan keeps them cool.

https://www.solosatoshi.com/product/bitaxe-naja-duo/?mtm_source=nostr&mtm_medium=social&mtm_campaign=bitaxe-naja-duo&mtm_content=post

#bitaxe #bitcoinmining #solomining
Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
The next halving is about 74,000 blocks away.

At block 1,050,000 the block subsidy drops from 3.125 BTC to 1.5625 BTC. At roughly ten minutes a block, that lands sometime in 2028. Fees still go to whoever finds the block.

#bitcoin #halving #bitcoinmining
1
Cody · 10h
Fees lol
Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
The Bitaxe GT 801 Gamma Turbo runs two Bitmain BM1370 chips for about 2.15 TH/s at about 43W stock.

Big aluminum heatsink with a 60 mm fan, a removable OLED screen, 2.4 GHz Wi-Fi and 12V power through an XT30 connector. Assembled and tested in the USA, ships from Conroe, TX.

https://www.solosatoshi.com/product/bitaxe-gt-gamma-turbo/?mtm_source=nostr&mtm_medium=social&mtm_campaign=bitaxe-gt-gamma-turbo&mtm_content=post

#bitaxe #bitcoinmining #solomining
Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
Taproot activated five years ago today, at block 709,632 (November 14, 2021, UTC).

Schnorr signatures, better privacy and efficiency for complex scripts, and the bc1p addresses you see around now. Bitcoin Optech's advice from that week still stands: run your own taproot-enforcing node and only accept transactions it confirms.

#bitcoin #taproot #runanode
Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
The Ix Tech El Mirage is a copper-plated aluminum heatsink for compatible single-chip Bitaxe and Nerdaxe boards.

It bolts down with four M3 screws instead of a two-pin clip, so pressure on the chip stays more even. The screws, locking nuts and a fan holder come in the box, and you can add a tube of Thermalright TF7 paste.

https://www.solosatoshi.com/product/el-mirage-heatsink-for-bitaxe-and-nerdaxe/?mtm_source=nostr&mtm_medium=social&mtm_campaign=el-mirage-heatsink-for-bitaxe-and-nerdaxe&mtm_content=post

#bitaxe #bitcoinmining #homemining

Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
Quick hashrate cheat sheet.

1 GH/s is a billion hashes a second. 1 TH/s is a trillion. A single-chip Bitaxe Gamma 602 does about 1.2 TH/s.

The whole Bitcoin network is measured in EH/s, and 1 EH/s is a million TH/s. That gap is why home solo mining is a lottery, with a fresh draw every block.

#bitcoinmining #solomining #homemining
11❀️1βœ…οΈ1
WantClue · 2d
ZH
Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
Latest Home Mining Podcast is up. 2Sats talks with PizzAndy and Aadhi about builds that only exist because they opened the hardware up.

Aadhi reverse-engineered a Canaan Nano3S, wrote open-source firmware for it, and got Doom running on the miner. The hashboard from that same unit is what heats Proof of Print's filament dryer.

Andy also built the Pizzaxe, a pizza bag with a Bitaxe GT 801 under the floor. Liquid loop in the base, leftover heat into the bag, 12V from the car. He mined off his phone's hotspot, and the pies stayed hot from Youngstown to Cleveland.

https://www.youtube.com/watch?v=mezoxYuqLMQ
1❀️1πŸ’œ1πŸš€1
Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
Blank or glitchy screen on your Bitaxe?

The Bitaxe OLED screen module is the 0.91-inch, 128 x 32 SSD1306 module on a 4-pin header. It does not change mining performance or firmware settings.

For Bitaxe boards with the standard 0.91-inch OLED, not the Touch, Naja Duo, Nerdaxe or NerdQaxe. Check the pin order first.

https://www.solosatoshi.com/product/bitaxe-replacement-oled-screen/?mtm_source=nostr&mtm_medium=social&mtm_campaign=bitaxe-replacement-oled-screen&mtm_content=post

#bitaxe #bitcoinmining #homemining
Solosatoshi.com πŸ‡ΊπŸ‡Έ profile picture
Open-source mining firmware means anyone can read how a miner works: how it shows hashrate, what it does with your pool and address, and how it updates.

That still does not prove the binary on your board matches the code, so check the exact release and hardware target too.

https://www.solosatoshi.com/open-source-bitcoin-mining-firmware/?mtm_source=nostr&mtm_medium=social&mtm_campaign=open-source-bitcoin-mining-firmware&mtm_content=post

#bitcoinmining #opensource #homemining
❀️1🧑1